Designed for 110 volt AC application and installation possibilities. Comes with 8\' cord and elbow adapter. Includes garden hose adapter and 90° elbow adapter for 1\" NPT pipe....

Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size.106UL & 14A6UL: UL Listed and include 6\' leads. Gold Series: feature a 5-year warranty....

Provides ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high output operation. Easily installed on any flat surfaces. Sealed motor shaft for moisture protection....

Designed for use as a washdown pump and/or to circulate water to your livewell tank(s). Heavy-duty submersible construction for use on commercial or pleasure boats. Must be mounted below the waterline. It does not deliver high pressure, nor is it self priming. It delivers a lot of water at low pressure....

Designed for smaller boats. The square model features 36 mounting variations as well as a gas resistant stainer base. Easy installation, nylon impeller, stainless steel shaft and replaceable power module....

Replacement motors for older style Rule Cartridge Bilge and Livewell/Baitwell pumps....

Original replacement strainer base for your Rule bilge pumps....

Control any pump equipped with automatic switch. Three positions: automatic, off and manual. Has spring return \"off\" from manual position. Black stainless steel panel with red indicator light and fuse holder....

Has a built-in fuse holder and an internally lighted rocker switch with 3 positions with the \"fail-safe\" spring return \"off\" from the \"manual\" position. Features a black plastic panel....

Has three positions: automatic, off and manual. Manual position has famous \"fail-safe\" spring return \"off\" so pump can\'t be left on by accident. Black stainless steel panel....

For any manually operated system. Attractive Black stainless steel panel. Fingertip control....

High impact molded plastic. Will not rust, corrode or discolor....

Allows for side mounting to vertical stringer, bulkhead or transom. Use when bottom-strainer mounting is inconvenient or impossible. Simply remove strainer, place in bracket and reassemble. Pump nozzle may point in any of three directions....

Molded from heavy-duty, high impact plastic. Rust and corrosion proof....

Pro-Set-3 is a premium 3-strand, 4-stage rope. Superior wet strength and wear. Low shrinkage, full life flexibility and consistent quality. Good for dock line or anchor line applications. Pro-Set-3 is easy to handle and splice....

Made of aluminum. For splicing double braid rope....

Complete with fid, pusher and instructions for a double braid eye splice, and two lengths of double braided rope....

Includes a pusher and 5 aluminum tubular fids (1/4\" through 1/2\" dia.)...

Clamcleats are marine grade nylon cleats. Ideal for most applications where high loads or rope surges are not likely to be encountered. Corrosion resistant....

Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately....

316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included)....

Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base trapping sealant in place providing a more watertight seal. Easy to install, requires two FH fasteners (not included)....

Heavy duty injection molded nylon tie-down cleats are corrosion and UV resistant. Larger cleats feature flared posts for added strength and stability. Durable and easy to install, they require two FH fasteners (not included)....

A great primary cleat for kayaks, canoes and other small vessels. Constructed of UV stabilized injection molded nylon it is corrosion resistant. Easy to use, simply weave rope around cleat arms, no knots required. The cross-functional lace back design is great for single handed tie-offs. Makes quick work of adjusting and securing anchor, mooring or...

Die cast chrome plated zinc cleats are an economical choice for freshwater applications. Designed to keep lines snugly secured. Easy surface mount installation with four FH fasteners (not included)....

Corrosion resistant investment cast 316 stainless bow chocks provide a smooth lead for your mooring or dock lines minimizing deck abrasion of working lines under load. Rounded edges and proper slant prevent chafing. Sold as a pair of left and right bow chocks. Installs with two FH fasteners (not included)....

Investment cast 316 stainless skene bow chocks provide a smooth lead for your mooring or dock lines minimizing chafe. The tips of the chocks are designed to overlap preventing the motion of the boat accidentally working the line free from the chock. Left and right skene chocks included. Installs with two FH fasteners (not included). Accommodates li...

Investment cast 316 stainless steel straight chocks provide a smooth lead for your dock lines minimizing deck abrasion of working lines under load. Rounded edges prevent chafing. Typically mounted in the stern or amidships to feed lines to horn cleats....

For use to add or replace a tie-down point on your boat\'s bow these bow eyes feature a die cast chrome plated zinc head with a galvanized shaft. 3/8\"-16 UNC threads. Nut and washer included. Recommended for fresh water applications. Breaking strength is 2,500 lbs....

features a die cast zinc chrome plated head with chrome steel shafts. U-Bolt surrounds cast eye for added strength. 5/16\"-18 UNC threads. For use as a tie-down point on your boats bow. Nuts and washers included. Recommended for fresh water applications. Breaking strength is 6,000 lbs....

Includes adjustable finish nuts for superior performance over crimp ring style bow eyes. The 3/8\" shafts have rolled threads. For use as a tie-down point on your boats bow. Can be used in conjunction with lifting eyes for a more robust lifting assembly. Machined 304 stainless steel....

Stern eyes are constructed of corrosion resistant machined 304 stainless steel and come with adjustable finish nuts which provide superior performance over crimp ring style stern eyes. For use as a tie-down point on your boats stern. Robust backing plate for added rigidity in water ski tow applications....

U-bolts are constructed of corrosion resistant machined 304 stainless steel and feature metric threads. The outer mounting plate is held in place by crimped ears forged into the U-Bolt. Comes complete with metric nuts....

Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading. Comes complete with metric nuts....

Great for block attachment, controlling lead lines, or creating tie down points pad eyes can be used for a variety of applications. Installs with two RH fasteners (not included). Constructed of stamped 304 stainless steel for corrosion resistance....

These corrosion resistant forged 304 stainless steel pad eyes can be used for a variety of applications. Great for block attachment, controlling lead lines, or creating tie down points. Installs with two FH fasteners (not included)....

Pad eyes can be used for a multitude of applications. Great for block attachment, controlling lead lines, or creating tie down points. Install with two #8 FH fasteners (not included).Nylon: Injection molded, UV stabilized and corrosion resistant. Chrome plated zinc: Die cast, recommended for freshwater use....

Commonly used to hold down batteries, fuel tanks, ice chests, life rafts, dinghies, etc. Their flat, low profile makes them ideal for webbing. Constructed of chrome-plated, forged bronze. Fasteners not included....

Ideal for block attachment, controlling lead lines, or creating tie down points pad eyes can be used for a variety of applications. Installs with two FH fasteners (not included)....

Injection molded nylon with a molded-in recess in the base to trap the sealant in place to provide a more watertight seal. Ideal for control lines. To be used in straight run application, not recommended for directional changes or for use with wire rope....